AKG D112 Vs Shure Beta 52A Comparison

To record a kick, you can use the microphone like AKG D112 and Shure Beta 52A. The location of the microphone very influential towards the sound that is produced, thus frequently experimented with set distance on the mic with the source of the sound. A great mic selection is very influential to the sound of pounding drums to be generated. Among AKG D112 and Shure Beta 52A mic, which becomes your favorite mic? Surely after read this article first.

AKG D112 vs Shure Beta 52A

AKG D112
The AKG D112 Kick Drum Mic is usually being used on stage or in the studio, the microphone is also using to clean up the dirty low down on the drum. The microphone stays free of distortion even at high sound pressure levels, is a solid and powerful response below 100Hz, and a very low diaphragm resonance, also plus great narrow-band rising high-frequency response at 4kHz, and extremely robust construction are other outstanding features. This mic works great for bass cabs, trombone, and other low-frequency instruments.Below are the features that included inside the mic: Handles up to 168db SPL with no audible distortion, low diaphragm resonance, and extremely robust construction. If you are worry about the broken one day, it also has 2-year parts and labor warranty. (Have a look : Audix D6 Vs AKG D112 Comparison)

Technical Specs

AKG D112Shure Beta 52A
- Polar Pattern : Cardioid- Polar Pattern: Supercardioid
- Audio frequency bandwidth : 20 to 17000 Hz- Output Level (at 1,000 Hz): Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL
- Recommended load impedance : 2000 Ohms- Impedance : Rated impedance is 150 ohms (45 ohms actual)

Shure Beta 52A
Shure Beta 52A has the great features like Frequency response shaped are special made only for kick drums and bass instruments, a built-in dynamic locking stand adapter with integral XLR connector with easy setup inside a kick drum, studio-quality performance until for high sound-pressure levels, supercardioid pattern & superior rejection of unwanted noise, and hardened steel mesh grille resists wear and abuse, and other functionality features. The Shure Beta 52A Kick Drum Mic is a kind of high-output and dynamic microphone which comes with a frequency response tailored specifically for kick drums and other bass instruments. You will be provided by superb attack and punch. They can deliver studio-quality sound even at extremely high SPLs. The modified supercardioid pattern ensures high gain-before-feedback and excellent rejection of unwanted sound. You can see also Audix D6 Vs Shure Beta 52A Comparison.

AKG D112 Vs Shure Beta 52A

- Large-diaphragm dynamic microphone for bass instruments
- Extremely high SPL capability
- Classic microphone for stage and studio applications
- Studio quality performance, even a high sound pressure levels
- Low sensitivity to varying load impedance
- Frequency response shaped specifically for kick drums and bass instruments

Conclusion
If in personally, we prefer and recommend you to choose the Beta 52A over the AKG D112 just because the IMHO the 52 gives you more to work with and just that straight up rock and roll thump. For a heavy metal or a hardcore than the AKG D112 is better suited for that type of music. All is depending upon where you bought it if you do not like the AKG D112 as your mic then you can probably go back and exchange for the Beta 52. We are considering most people are not going to use either one as a vocal mic.

Leave a Comment

Your email address will not be published. Required fields are marked *