AKG P220 Vs Rode NT1A Comparison

Are you wondering whether you should go with AKG P220 or Rode NT1A? Of course, both AKG P220 and Rode NT1A are true condenser microphones available at relatively affordable and budget-friendly price points. Both products have received a lot of positive reviews on the market. Thus, we can be certain here that both are decent products. Even so, Rode NT1A is usually being priced a little bit higher over AKG P220. Another thing to note, AKG P220 and Rode NT1A actually have different audio characteristics. So, before you make a choice, make sure that you are aware of the differences between them!


In terms of design, of course, you can see that the two products differ from each other. AKG P220 comes with an all-metal housing for maximum ruggedness and durability. The body is colored in black while the grille is light brown. On the other hand, Rode NT1A comes with a silvery hue, also with a solid metal housing. It features internal capsule shock mounting to eliminate handling noise. Compared to AKG P220, Rode NT1A is slimmer and lighter, making it more convenient to handle.

Technical Specs

AKG P220Rode NT1A
- Audio frequency bandwidth : 20 to 20000 Hz - Large 1" (25mm) capsule with gold plated diaphragm
- Equivalent noise level : 16 dB-A- Cardioid polar pattern
- Sensitivity : 20 mV/Pa- Self noise of only 5dB (A)
- Signal to Noise : 78 dB-A- Ultra low noise, transformerless surface mount circuitry
- Preattenuation Pad : -20 dB- Wide dynamic range
- Bass cut filter : 300 - 12 dB/octave Hz- Gold plated output contacts
- Electrical impedance : <= 200 Ohms- Internal capsule shock mounting

Both models come with a cardioid polar pattern. So, they pick up sounds the best from the front side. Sounds coming from the sides and especially the rear will be rejected. This polar pattern allows you to isolate the main audio source from background noise.

Read also : AKG P220 Vs P420 Comparison.

Both mics come with a frequency response range of 20 Hz – 20 kHz. Such configuration allows these mics to capture sufficient lows, mids, and highs to deliver well-staged and accurate bass, midrange, and treble. However, their different designs make them have different output characteristics. AKG P220 delivers bright and clear sounds, but is not very warm. Yet, AKG P220 is quite sensitive, with a sensitivity level of 20 mV/Pa. The mic is quite silent, without too much operation noise.

However, on the other hand, Rode NT1A boasts superb clarity in its audio reproduction. Rode NT1A is ultimately very silent; it only has a self-noise level of 5 dB-A! With the mic, you can capture any vocal with virtually no noise. It is also able to capture subtle details, and delivers warm, accurate, and pristine-clear audio reproduction. It also has a decent maximum SPL handling, 137 dB SPL, allowing you tackle loud input levels with ease.

AKG P220 has been equipped with a -20 dB pre-attenuation pad to allow you to handle high input levels, and a bass-cut filter for vocal presence boost. The mic comes along with a shock mount and a metal carrying case.

Rode NT1A’s ultra-low self-noise level and internal capsule shock mounting have allowed for superior clarity. It also comes with a pop filter that you can use to filter away wind and breath sounds, and a dust cover for storage and travel.

AKG P220 Vs Rode NT1A

- Audio Frequency response: 20Hz to 20kHz
- Max SPL: 155 dB
- Sensitivity: 20 mV/Pa
- Pattern and type Capsule: Condenser
- 10 Year warranty on the Rode NT1-A
- Large 1" (25mm) capsule with gold plated diaphragm
- Self noise of only 5dB (A)
- premium 20' microphone cable

In general, Rode NT1A is the best way to go. The ultra-low self-noise level and excellent warmth, crisp, and clarity really generate superior audio reproduction. AKG P220 is viable if you prefer a different audio character.

Leave a Reply