Browse Author: admin

Shure Beta 87A Vs 87C Comparison

Looking for a microphone may not an easy task to do. You may have to spend hours on the net and stores to check which item is the most suitable for you and match with the budget you are willing to spend. Beside the type of microphone, you also have to consider what are they best part to get the right item. In today Shure Beta 87A Vs 87C article, we are going to compare these two similar yet different microphones to give you information regarding what you can expect from them.

In this article, we are going to give you information about:
– What are Shure Beta 87A and 87C
– What Shure Beta 87A and 87C can offer to you
– Shure Beta 87A vs 87C

About Shure Beta 87A
The Shure Beta 87A is claimed to be able to deliver a superb quality with an open sound with of course lots of detail and clarity. The mic has a wide dynamic range and can deal with both weak and powerful vocals without the distortion. It is suitable with a well-tuned stage performance because it can cuts through the mix without putting strain on the singer. This one has supercardioid design pattern to achieve superior gain before feedback while giving you a minimum stage bleed.

Unlike many other Shure’s microphones that are dynamic, this one is an electret condenser. This type of microphone usually have higher detail and clarity even though there are a lot of them only can perform great in a sterile studio conditions. The company break this paradigm by creating a masterpiece that has been well-received by both presenters and singer, moreover it is considerably more affordable than many professional condenser, so it can be available for wider user.

Shure Beta 87A Sound Quality
When talking about a microphone, we also have to take a look in the sound quality. This microphone is comparable to any mid-range studio mics without the capricious and require any sophisticated set up like pop filters and windscreen. It comes with low noise preamplifier and electrical stuff with a nice internal shocks protection to minimize the handling noise, so it can be viable and reliable solution without burdening you. The meshes you can find on the unit acts as both pop up filter and windscreen that won’t affect the detail.

The Shure Beta 87A also seems to come with a great ability to work in high sound pressure environment for it is rated with 140dB, so it shouldn’t overload and give you any noticeable distortion. There are many other condenser that will sound unpleasant at the point even though those with higher price. Unlike those dynamic microphone with muddiness characteristic, this one will actually open up your voice. In the details, it can even enhance your voice just like a studio LDC but less sensitive.

When you try listening to the sound, it can produce a quite bright vocals and it will also works for most vocals. But, if you have a very thin vocal, it is recommended to lower it a little bit with EQ, so your sound won’t get brittle. The highest frequency response is at 10kHz and will peaks with some sparkle to give you a hi-fi feel.

Technical Specs

Shure Beta 87AShure Beta 87C
- Frequency Response: 50 to 20,000 Hz- Frequency Response: 50 to 20,000 Hz
- Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3- Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
- Wide dynamic range (117 dB) and low distortion characteristics- Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
- Polar Pattern: Supercardioid- Polar Pattern: Cardioid
- Product Dimensions 7.6 x 2 x 2 inches- Product Dimensions 7.6 x 2 x 2 inches

About Shure Beta 87C
Another great microphone that you can get your hand in the market is Shure Beta 87C. Unlike the other model, this one is cardioid instead of supercardioid. If you are not familiar with the term yet, cardioid design will primarily picks up sound within a 130-degree angle in front of the microphone, so it has a reduced sensitivity to the sound comes from the outside that range and will rejects almost all audio that comes from behind the microphone.

At the other side, supercardioid will pick up sound within a 115 degree angle in front of the microphone, so it will have very little sensitivity to the sound that comes beyond 120 degrees off-axis on its either side. But, it will still pick up a narrow range of audio hitting it from directly behind the microphone. The company said that the 87C model is designed for those vocalist who rely on in-ear monitoring or IEM. Read also: Shure SM58 Vs SM57 here.

Shure Beta 87C Sound Quality
Since it has cardioid design, it will be able to pick up a wider field of audio than supercardioid, so you will find more ambiance present in your IEM mix, which is why many vocalist prefer this one than the other model. In the output, if you compare this with 87A, the sound will be noticeably lower and you will need to increase the gain in your mixing board when you use this microphone to reach the almost-equivalent level, so it may not that suitable for those with very soft voice.

If you use the 87C to sing live and instead if IEMS you rely on floor monitors, many people will probably think that the vocalist with 87A is more preferred than 87C because when the monitor placement should be angled to the side if the microphone stand, the 87A will pick up some sound directly behind it and then result in feedback when pushed to high gain level.

These two are able to isolate the vocalist and are undeniably suit solo vocal performance as well as good for a group of singers doing backing vocals. It also did a good job in in minimizing handling noise even though not as good as the SM58.

Now, let’s compare the Shure Beta 87A with Shure Beta 87C. As it has been mentioned earlier, the main difference between these two if the design for the original 87A is a supercardioid while the 87C is cardioid. You already know the difference between those designs and the latter has less proximity but better for quite stages or with the monitor placed in the middle while the 87A will work better in conventional stages.

Shure Beta 87A Vs 87C

- Smooth frequency response with gradual presence rise
- Highly consistent super cardioid polar pattern provides superior gain before feedback
- Electronic low-frequency roll off compensates for proximity effect
- Smooth, wide frequency response with slight presence rise
- Uniform cardioid polar pattern for maximum isolation
- Minimum off-axis tone coloration

All in all, the decision is all yours to make. In our opinion, both of them re equally great and it depend on what you are going to use both of them for. However, in this article we will recommend you the Shure Beta 87A for it has better performance in conventional stages as well as has the benefit of tighter cancelation and better GBF. From the price point both of them are in the same range depend on the seller, so it shouldn’t affect your decision.

Shure SM58 Vs SM57 Comparison

Choosing the best microphone for your need is not an easy task to do. You have to consider a lot of things and match them with your main purpose, such as whether it is for vocal or for your instruments. In today Shure SM58 Vs SM57 article, we are going to compare both of these microphones to give you more information regarding what you can expect from them. If one/both of them took your interest, go check our article below.

In this article, we are going to give you information about:
– What are Shure SM58 and SM57
– What Shure SM58 and SM57 Look Like
– What Shure SM58 and SM57 can offer to you
– Shure SM58 vs SM57

About Shure SM58
As we know, you can never go wrong with Shure SM line. The company standard professional like of microphone are the image of professional microphones with acceptable price, so they are available for a wider market. The SM58 is loved by many people for its affordability and practicality in both recording as well as when used for live performance. As one of the bestselling microphone in the market, the exceptional sound quality and outstanding build are the reason why it stands out from its peers.

Shure SM58 Design
This microphone is only able to stand the test of time and more in into pure functionality, so you shouldn’t expect any astonishing appearance comes from the unit. However, when we say about durability, we mean how good it is to survive the rough live of a musician, like when being dropped accidentally. It weighs around 300 grams and connect via 3-pin XLR with a steel material with no plastic here, which is the main reason for its durability.

You may replace the grille or add numerous accessories to prolong the live even longer. The mic comes with a carrying bag from leather material, so if you plan on carrying this around, you may want to purchase a hard case.

Shure SM58 Capabilities
When talking about microphone, the most important thing should be the sound quality. The SM 58 has a good sound characteristic but if you want to improve it, try connect it to a mixer with good characteristics, audio interface or use X2u bundle version. All the technical features on the mic shows a clear usage of the unit, which is vocal and speech. It is a cardioid microphone, which polar pattern eliminates unwanted noises and will definitely works great when combined with pop filter.

The microphone also has another innovative feature in this model, which called Pneumatic shock-mount systems that will cut down handling noise. With this feature, you can rest assure about unpredictable noises from external mechanical impacts. In the high notes, the cardioid design makes it less fussy about monitor placement. Its frequency response is listed at 50Hz to 12kHz and has a rich mid-range. In around 7.5kHz, the mic will dips slightly to help vocal cut through mix without becoming sibilant.

The SM58 is suitable for people who will perform on stage or those who need it to use in an outdoor setting with some loudspeaker. The perfect users will range from pro vocalist to church pastors giving speeches. You may also use it with instruments too but it is better to pair it with some VST EQ software or analog EQ after microphone signal.

Techinical Specs

Shure SM58Shure SM57
- Type Dynamic- Microphone Type Dynamic
- Frequency Response 50 to 15,000 Hz- Frequency Response 40 to 15,000 Hz
- Polar Pattern Cardioid- Polar Pattern Cardioid
- Sensitivity (at 1,000 Hz Open Circuit Voltage) : -54.5 dBV/Pa (1.85 mV), 1 Pa = 94 dB SPL- Microphone Form Factor: Handheld/Stand-Held
- Impedance Rated impedance is 150 Ohms (300 Ohms actual) for connection to microphone inputs rated low impedance- Output Impedance 150 ohms
- Connector Three-pin professional audio connector (male XLR type)- Connector(s): XLR 3 Pin
- Net Weight 298 grams (10.5 oz)- Weight 0.63 lbs
- Dimensions 162 mm (6-3/8 in.) L x 51 mm (2 in.) W- Connectivity: Wired

About Shure SM57
The SM57 are often compared with its brother to see which one is better than the other. These two microphones are very similar yet also different. As one of the SM model, you already know how good they are in a very wide range of music as well as when used to record multiple instruments. It is loved by many people since first launched and still continue up until now. When surfing the net, you will see so many good reviews about this mic and they are true.

Shure SM57 Design
Just like many other Shure’s mic, this one feels great when hold. It has a funky and vintage appearance but very durable, which makes it last forever in your equipment compartment if treated properly. The unit is quite heavy at 1.25 pounds with metal capsule unlike some cheap mics. When you look at the product name, you may find there is some with “LC” name and some without. LC stands for “less cable” because the former product that bundled with XLR cable are discontinued. Read also: Sennheiser E835 Review here.

Shure SM57 Capabilities
The SM57 is able to grab both high and low frequencies thanks for being dynamic microphone. What’s makes them great for stage use is the high gain before feedback functionality, so it will give you a very high volume without hearing that pesky screeching noise. Many people are using the microphone strictly for vocals, but in reality you can use it for instruments, which is why it is very well-known for the great versatility.

The cardioid pattern in the unit makes it even more exceptional since it is designed to focus on the main source of sound while simultaneously decreasing background noise to give you a good isolation. You may even see some drummers have several of this mic at a time because even though they are relatively near to each other, they are able to pick each piece of their kit to give them all separate sound sources.

The SM57 also doesn’t necessarily need phantom power, so even though you don’t have a recorders/audio interface/mixers with the feature, you will be just fine. However, it is still recommended to use it with something that can help increase the gain to get the full power of the microphone.

Now, let’s compare Shure SM58 with SM57. When looking at them from the internal parts, they are identical microphones but from the outside, SM58 has this round ball on top of it as well as an internal windscreen. This additional features force the mic to be farther from the source while the windscreen will dampen the high frequency and cut wind noise. At the other hand SM57 has shorter grille design to allow it closer to the source and has better proximity effect as well as more susceptible to wind noise.

Shure SM58 Vs SM57

- Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
- Effective built-in spherical wind and pop filter
- Pneumatic shock-mount system cuts down handling noise
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
- Contoured frequency response is clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, precussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main source while reducing background noise
- Extremely durable under heaviest use

All in all, the decision is all yours to make. In our opinion, both of them are equally great depend on what you want to use them for. If you are strictly want to use it for vocal on stage, the SM58 is the better choice while for instrument and recording on studio SM57 is the better choice added with a pop filter in front of it.

Sennheiser e835 Review: Exceptional Affordable On-Stage Vocal Mic

Shopping for a new microphone may take you into long sitting in front of your smartphone or laptop to compare and match what you want from the product you are aiming for or to just ask for some recommendation from people with more experience especially of you never purchased one before. In today Sennheiser E835 review, we will give you more information regarding what you can expect from this microphone, so you can decide with ease whether this one is the right option or not.

In this article, we are going to give you information about:
– What is Sennheiser E835
– What Sennheiser E835 Look Like
– What Sennheiser E835 can offer to you
– Is Sennheiser E835 suitable for you

About Sennheiser E835
Sennheiser move to the low budget market seems to be successful with the continuously growing fan base in this segment. In the past the company also already launched several similar microphones and proof their ability to create best budget items without scarifying the quality. As one of the most well-known company in the headphone market with almost 70 years of experience in producing sound equipment, they also made great microphones. If you are a lead singer, choosing the most suitable microphone will bring the best in your voice.

This Sennheiser E835 is manufactured in Germany and brings out 10 year manufacturer warranty. As you can expect from a one of the best budget in the market, this one is often compare with Shure SM58 and the result are quite mixed with some may prefer one over the other. Not only it is suitable for lead vocalist, you may consider this one to help MCing and do other non- critical applications. The sound produces is said to be clean, unobtrusive and intelligible voice but still have to be kept moderate.

Sennheiser E835 Design
Just like many of its competitors, the design of Sennheiser E835 is kept as simple as possible, which will allow the company to focus more into the performance and the hardware aspect to even more improve the microphone. For the body, Sennheiser use a solid metal material as well as a very robust grille. These material has a darker finish in matte gray with black tones. To put it simply, it all thanks to the labelling that tells you it is a branded item not just some unnamed handheld.

To be more detail, this microphone has a quality suspension for the capsule to effectively reduce handling noise and hum bucking coil to minimize the electromagnetic interference. You may not notice it from the picture, but the microphone is actually pretty comfortable when you try holding it. It is also durable enough and able to withstand some mishandle just in case you are not being careful with the microphone. However, you still shouldn’t drop it too often.

Durability also found on the inside element as all of them are rock solid and very consistent. For the price you are going to spend to own the item, it is extremely well made.

Sennheiser E835 Features
In the specification and features, there is nothing surprising or unique in Sennheiser E835. There are nothing like flashy technology or anything similar but is also proven that the company somehow made the perfect component choice to give you the performance. The frequency response range is at 40Hz to 16kHz, which makes the item arguably wider in the high end compare to its many rivals in the market. It still uses standard cardioid polar pattern and the connectivity is available in form of XLR port, which will make the microphone compatible with any board or mixer out there.

Sennheiser E835 Sound Quality
When talking about a microphone, we also have to talk about the sound quality. When you plug Sennheiser E835, chances are you are going to be surprised and there is no doubt that this one is indeed not only for vocal use. It has bright response as well as strong in-your-face presence, which will make it able to cut through a mix of instruments but lacks some transparency in the higher end. For a microphone in its class, the sound is not too muddy and definitely not inferior from the rivals. Read also: Rode NTG2 Vs VideoMic Pro here.

Even though musician with more experience will get annoyed with it, most people won’t notice the lacking. It able to perform better than the SM58 but the transient response is not that far better. In the upper midrange the sound will get a bit bloated and gets outright harsh if you push it too hard like in those fall into range soprano harmonics. However, you shouldn’t only get one-sided impression of the microphone because this one is excellent at handling speech with a great balanced in the low end.

It will sounds natural with minimum impact of proximity while the talents will never get boomy. In the brightness, it surprisingly performs very well for baritone singers. It even said that you don’t need those expensive microphone to sound good as long as the gain before feedback is not an issue. If you are tenors or soprano, the product is still good but you have to deal with losing some detail and get a bit edgy in the upper midrange.

This minimal proximity effect is probably why the E835 is preferred by many live performers especially when they go off-axis. The microphone is said to be able to pick up the sound even if the user are only a few inches away from it without picking the background sounds. The cardioid pattern also provide insulation for the microphone from other on-stage signals whole any electrical interference is removed by the hum compensating coil.

All in all, the Sennheiser E835 is a solid package of microphone that will give you a good performance whether you are a lead singer or doing other works on stage like MCing or even deliver speech as speakers. Not only for human voice, you may also use it to record or used on instruments like guitar cabinets and snare. It is not the best microphone out there but for the price range it able to give you more than enough.

- Cardioid Pick-up pattern - Good Ambient noise and feedback rejection - Powerful sound presence boost

In our opinion, the best microphone for you is the one you feels comfortable using. Your dream microphone may come in a higher price range than Sennheiser E835 but its performance will not disappoint you especially if compared to its many rivals in the market.

Sennheiser e835 Review : Specifications
– Analog
– 40Hz-16kHz
– Dynamic
– Cardioid

Sennheiser e835 Review : Pros
– Affordable
– Clear and natural sound
– Minimal proximity effect
– Sturdy

Sennheiser e835 Review: Cons
– Lacks transparency
– Hyped upper midrange and will get harsh especially on strong notes
– Will produce bad feedbacks in loud stages

Sennheiser e835 Review: Price
Get your Sennheiser e835 at the best price here!

Rode NTG2 Vs VideoMic Pro Comparison

Looking for a microphone to be used as a professional audio recording my not an easy task. You can choose from so many different manufacturer in the market and in a wide range of price that also followed by their own quality. In today Rode NTG2 vs VideoMic Pro article, we are going to compare these two brothers to give you more information regarding what you can expect from them and how they are set apart from each other. If one/two of them took your interest, go check our article below.

In this article, we are going to give you information about:
– What are Rode NTG2 and VideoMic Pro
– What Rode NTG2 and VideoMic Pro can offer to you
– Rode NTG2 vs VideoMic Pro

About Rode NTG2
The Rode NTG2 is said to be one of the company’s entry-level 11” short range shotgun microphone that not only able to give you a clear accurate sound but also able to provide a good amount of rejection. As what you can expect from Rode, this microphone is built packed with quality and also one of the most popular model due to its remarkable performance as well as the wallet-friendly price. When it was first available, the mic can be considered as one that has the narrowest pickup pattern among other short shotgun.

Rode NTG2 Design
When talking about the built, Rode NTG2 is clearly built to be durable. It has a long 10-year warranty which is nice thing to have for an entry model. This one is a shotgun mic with a supercardioid polar pattern, which makes it a strongly directional in the front and has diminished responds to the sounds from the side and rear. It comes with lightweight metal housing that is ideal for camera mounting. However, there are some annoyance, such as the difficulty to access the roll of switch.

Rode NTG2 Abilities
Rode NTG2 comes with built-in low-cut/high pass filter that has a fixed cutoff frequency of 80Hz and is very useful to handle low frequency background rumble when you record in typical urban environment. This feature also let the shotgun to be mounted directly into something like HDSLR and operated with 2 AA batteries since not many out there have the same filtering.

As for the sound quality, Rode NTG2 has e very smooth and almost ideal frequency pattern for an entry-level mic, which means it able to represent the sound with accuracy and minimum coloration. The sound it able to reproduce is relatively rich and sensitive enough to capture the slightest detail in its range. If you are taking the price into consideration, the mic is more than enough for budget filming, but you will still need more tools and skills for certain situations.

The maximum SPL for this microphone is quite high, which makes it applicable for some very loud environments, such as those where you need to shout in order to be heardat 131 dB @ 1% THD. However, you may still need to add a bit gain to the recording because this mic is soft voices even though it has no impact on the quality. The noise figures are also average but it should be enough for low-entry level microphone and the sibilance is still kept to minimum. Read also: Sennheiser e935 Review here.

Technical Specs

Rode NTG2VideoMic Pro
-Power Req.: 48V Phantom Power or 1.5 AA battery- Rycote Lyre shock mounting onboard
-Equivalent Noise Level (A-weighted): 18dB-A- Ultra lightweight (85g/3oz)
- Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz- 9V battery powered - over 70 hours use (alkaline)
- Maximum Output Level: 6.9mV- Integrated shock mounting & foam windscreen
- Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)- 3.5mm stereo mini-jack output (dual mono)
- Output Impedance: 250Ω- Two step High Pass Filter (flat, 80Hz)
- Frequency Range: 20Hz - 20kHz- Three position level control (-10dB, 0, +20dB)
- Polar Pattern: Supercardioid- Camera shoe mount with 3/8” thread for easy boompole mounting

About VideoMic Pro
VideoMic Pro is also one of the most popular shotgun microphone from Rode. This unit is built to follow the predecessor that has been a long favorite of shooters who are seeking for an inexpensive and lightweight shotgun. Compared to the original model, the Pro is obviously smaller and has more accessible features. If you are in need of a microphone that can give a better quality audio record from your digital SLRs, you might want to take look at this one.

VideoMic Pro Design
As it has been mentioned earlier, VideoMic Pro is small and lightweight with just 15 cm long and 86 grams, so it won’t overwhelm even the smallest video-enabled SLRs. It is powered by a single 9-volt battery located just under the microphone itself and the company claims that this single battery will be able to give you enough juice for 70 hours of recording time. The connector is 3.5mm jack and you may get the free windshield which they called “Deadcat” when you redeem the extended warranty to give additional coverage against wind noise.

VideoMic Pro Abilities
VideoMic Pro is an active supercardioid condenser microphone that means the axis sound rejection is superb. Similar to the NTG2 model we have talked above, this one also has high pass filter that can be activated through a switch located at the back of the microphone to allow it internally filter out handling noise and low noise when taking video in crowded typical urban environments. The biggest improvement it has over the predecessor is the built in attenuation and boost functionality to operate under different kinds of situations as well as equipment.

VideoMic Pro 10 dB PAD and 0 dB settings will be great for loud sources or environments where the sound clarity is not an issue and even though it is similar to the older model that doesn’t contain any settings, the microphone will show its ability when the level is boosted +20 dB since it will give you a clear and clean boost for poor quality pre-amp inputs commonly found on Camcorders and DSLRs. This will allow you to get lower noise floor and cleaner audio signal.

Now, let’s compare Rode NTG2 with VideoMic Pro. From weight, VideoMic Pro is slightly lighter compare to NTG2. From easy mounting, VMP is easier with the 3.5mm jack while NTG2 will need an XLR adapter for quick plugging. From the sound, NTG2 is better with its low noise circuitry to limits handling noise wonderfully as well as better sound fidelity and able to focus on subject more effectively with less overall hiss compared to VMP.

Rode NTG2 Vs VideoMic Pro

- Broadcast sound quality
- Low noise circuitry
- 48V phantom power or 1.5V AA battery
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Rycote Lyre shock mounting onboard
- All new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6" length)
- Ultra lightweight (85g/3oz)

All in all, the decision is all yours to make. In our opinion, you can’t go wrong with any of these microphone. The NTG2 is clearly better than VideoMic Pro since it has better build and sound quality even though you will need to purchase some accessories later. The VideoMic Pro is of course more affordable, still able to performs great and meshes with DSLR so well, but taking all the plus side in the other, we will recommend you NTG2 over VMP.

Sennheiser e935 Review: A Bright, Sensitive Mic for High Quality Vocal

There are so many options out there when you are looking for a microphone. Some are not recommended to purchase because the quality are just not there, some of them are decent enough but there are only a small amount of units that can give you what you want. In today Sennheiser E935 review, we will give you more information regarding this great piece of microphone, so you can decide whether it will worth your money or not. If you are interested, go check our article below.

In this article, we are going to give you information about:
– What is Sennheiser E935
– How are Sennheiser E935 Build Quality
– How Sennheiser E935 Sound
– Is Sennheiser E935 suitable for you

Before choosing a microphone, there are several things you need to pay attention first to make the best decision. There are 3 types of microphone out there, Dynamic, Condenser, and Ribbon. All of them are set apart by what’s inside, but the most popular for small live performance or karaoke is usually the first. Dynamic is best known for its simple and sturdy design and available in a wide range of quality and prices.

In simpler way, dynamic microphone is a mini loudspeakers that works the opposite way. If speakers works by converting electrical signal into sound, dynamic microphone work in the other direction by converting sounds to electricity.

About Sennheiser E935
For many people Sennheiser is not an unfamiliar name, being very popular for their line of impressive headphones, the company in fact not only manufactured and marketed headphones but also works with other audio device, which is a microphone. Sennheiser E935 is said to be one of few robust dynamic microphone out there that you can purchase at a pretty affordable price. The unit was launched years ago in 2004 but still being the favorite of many people up to these days.

The Sennheiser E935 is a powerful microphone, because it has a well-balanced sound and clarity of a condenser mic. It also unpretentious and able to work just as beautifully for both female and male with deeper voices. The unit is aimed at working musician demographic and if you compare it to similar unit from Sennheiser, the e945, it will sound more natural, which makes it great for a wide range of music from peaceful parties, karaoke, jazz club, or even loud concerts.

Sennheiser E935 Design
Before going into what you can expect from Sennheiser E935, let’s talk about the build and design. This microphone is measures at 10 x 3.5 x 5 inches and weigh around 12.5 ounces, built with solid, rugged metal design that provide a great feel when held as well as durable. It is proven to be a workhorse onstage, able to handle different weather conditions and just in case something unwanted happen, the company provide a 10-year warranty.

Not only it is resistant to feedback, to make sure the interference is minimized, there is a humbucking coil while the shock resistant mounting will minimize the handling noise. When you purchase the unit, you will also get several items in the box beside the microphone itself. Sennheiser E935 comes with microphone mount, 5/8” to 3/8” adapter, and carrying pouch to secure your mic when you take it from live to live.

Sennheiser E935 Sound
When talking about the sound, the best way to describe Sennheiser E935 is loud, clean, and clear. As it has been mentioned earlier, the mic works with both female and male performers because it is not picky about voice depth. Thanks to the cardioid, it able to delivers more natural sound than the supercardioid e945 model. What you can really notice when testing it is the level of feedback rejection, which makes it suitable for even loud applications, such as in medium live rock concert.

In the frequency pattern, Sennheiser E935 offer well-crafted frequency pattern and it transits gently from bass cut off to reasonable presence cut, so you don’t get hit with sudden bumps. The frequency response is listed as 40Hz – 18kHz and when tested it begins to roll off the bass at around 150Hz with a minor .5dB cut that begins at around 500Hz then from there to 1kHz you will see it gradually boost but stay flat up to 2.5kHz.

From this point you will see another boost of 3.5dB that remains flat from 4kHz to 10kHz while at 11kHz there is a roll off but will decreases steadily. It shows an optimal balance of brightness in all frequencies, so it should be able to help your live performances runs well because your voice will easily cuts through instruments. It also sound rather smooth even with the amount of detail and clarity, which many mics out there can’t achieve the same thing.

Sennheiser E935 Features
In the market, Sennheiser E935 is the direct competitor of Shure BETA 58A and overall these two are quite similar to each other. However, they also have some differences in the important features; for starters as it has been mentioned earlier, E935 has its own version of shock mounting system that works very well. Inside the unit, you can find a strong Neodymium magnets that includes some boron. The combination of these two proved to give boost in the consistency and makes is a very versatile microphone for a live performance.

All in all, the final decision is all yours to make. We can see that Sennheiser E935 is a great microphone and able to make itself stand out among its peers in the market, which all thanks to the quality planted on the unit whether it is the build quality or sound quality. The high output and sensitivity it can gives to you also mean that it will need more disciplined vocals and handling. With all of these capabilities, seeing at Sennheiser E935 price, it won’t look expensive at all, in fact the price can be considered affordable for all it can give to you.

- Made for the working musician - Shock mounted capsule with humbucking coil - Metal construction - Cardioid pickup pattern: Insulation from other on-stage signals - Neodymium ferrous magnet with boron: Keeps microphone stable regardless of climate

Clean and bright vocals that can cut through a mix of instruments without a hit of muddiness is what you can achieve with this microphone. All in all, it may suitable or not for you depend on what you are looking for. However, if you are looking for an industry standard or those with similar excellent value, robust construction and great performance, we will highly recommend you Sennheiser E935.

Sennheiser E935 Review: Specification
– Analog
– 40 – 18kHz
– XLR connectivity
– Dynamic
– Cardioid

Sennheiser E935 Review: Pros
– Great smooth sound
– Detail and clarity
– Able to cut through mix
– Reasonable price
– Feedback resistance

Sennheiser E935 Review: Cons
– Presence boost may cause sibilance issues

Sennheiser E935 Review: Price
Get your Sennheiser E935 at the best price here!

Audio Technica ATR2500 Vs Blue Yeti Comparison

Audio Technica ATR2500 vs Blue Yeti are budget-friendly USB microphones that are suitable for home recording, podcasting, and voice-over uses. They are available in a similar price range, with Audio Technica ATR2500 being slightly more affordable than Blue Yeti. So, which is better for you to choose? Continue reading below to see the differences and comparisons between these two microphones.

In this article, we will discuss about:
– The size, weight, and portability of each mic,
– The distinctive features of Audio Technica ATR2500 vs Blue Yeti,
– The comparison of their sound quality, and
– Which USB microphone that is more recommended in the end.

Size and Weight
If you need a portable USB mic that you can carry along in any trip or travel, Audio Technica ATR2500 is probably a better option. This microphone comes with a significantly slimmer, lighter body. It has a simple tubular shape, and it comes with a foldable stand that is lightweight and practical. You can easily put everything that you need to work with this mic into your bag. See also: Audio Technica ATR2100 vs Blue Yeti.

On the other hand, Blue Yeti is pretty portable – you can easily move it around in your studio room. However, it is not really suitable for a trip or travel. It is quite bigger and heavier. The integrated stand is particularly bulky, so it will take a lot of space if put in your bag. This mic is more suitable for usage in a studio room.

Techical Specs

Audio Technica ATR2500Blue Yeti
- Element : Condenser- Capsules : condenser, pressure gradient
- Polar Pattern : Cardioid- Polar Patterns : cardioid, bidirectional, omnidirectional, stereo
- Frequency Response : 30-15,000 Hz- Frequency Response : 20Hz - 20kHz
- Sample Rate : 44.1 kHz/48 kHz- Sample Rate : 48kHz
- Bit Depth : 16 bit- Bit Rate : 16bit

Pickup Pattern
Both Audio Technica ATR2500 and Blue Yeti are side-address mics. In other words, you speak into the side of the mic, not to the top. However, there is a distinction with their polar patterns. Audio Technica ATR2500 only has a cardioid polar pattern – which is generally not a problem, as cardioid is the most commonly used for various purposes.

Blue Yeti has four selectable polar patterns, which include cardioid, bidirectional, omnidirectional, and stereo. Hence, with Blue Yeti, you can adapt to different recording conditions. The bidirectional pattern is nice for interviews, and the stereo pattern is quite useful when you want to create a stereo track. However, cardioid is the one that you will mainly use in most cases. You can find out more about this mic from the manufacturer, Blue Microphones, here.

Other Features
Each of these two microphones comes with a headphone port for zero-latency direct monitoring. Each has a dedicated headphone volume control, so you can adjust the volume for monitoring without altering the actual input that is being recorded.

However, Blue Yeti comes with two additional features that are not available on Audio Technica ATR2500. First, this mic has a mute button, which may come to be very handy for controlling the recording. You just need to hit the button to pause the recording instead of toying with the software, and hit it again when you are ready to continue. Second, this mic also has a gain control, which is nice for adjusting the input level.

Sound Quality
Audio Technica ATR2500 and Blue Yeti both record in 16-bit/48kHz. Generally, they both sound good. They can capture sound with very good accuracy, sharpness, and detail. Audio Technica ATR2500 does have a lower self-noise level, but Blue Yeti is not really worse. On the other hand, Blue Yeti has a wider frequency response range that can capture more high-end and low-end.

Audio Technica ATR2500 Vs Blue Yeti

- Side-address condenser microphone with USB output for easy connection to your computer
- Ideal for podcasting, home studio recording, field recording, and voiceover use
- Built-in headphone jack allows you to directly monitor your microphone output without audible delay
- Adjust headphone volume with easy-to-use controls on the front of the microphone
- Tri-capsule array - 3 condenser capsules can record almost any situation.
- Multiple pattern selection - cardioid, bidirectional, omnidirectional & stereo.
- Gain control, mute button, zero-latency headphone output.
- Perfect for vocals, musical instruments, podcasting, voiceovers, interviews, field recordings, conference calls

Between these two mics, we recommend you to choose Blue Yeti. It is more versatile with multiple polar patterns. The mute button and gain control are very handy. The sound quality is about as good as Audio Technica ATR2500. It actually has a wider frequency response range, which means that it can capture more high-end and low-end.

Shure MV88 Vs MV51 Comparison

Shure’s Motiv microphones are truly awesome. These mobile-friendly microphones allow artists and podcasters to have a new way to capture quality sound whenever and wherever they go. However, the different models may confuse you – which model is actually the best for you? In this article, we will help you choose the right mic by comparing Shure MV88 vs MV51.

Both Shure MV88 and Shure MV51 are available in a similar price range. However, they have very different features and are suitable for different needs. Below, you can find out more about:
– Which mic that is more portable and easier to carry around,
– The distinctive advantages or benefits of each mic,
– The suitable uses of Shure MV88 vs MV51, and
– Which Shure Motiv model that is more recommended for the money.

Size and Weight
First of all, let’s take a look at the size and weight of each microphone here. As mentioned above, these two microphones are very different. Shure MV88 much smaller and lighter. It has a diameter of 0.71 inches and a length of about 2.658 inches. The weight is only 1.43 oz. The compact and lightweight design makes this mic a lot more portable, suitable to bring along for field recording. See also: Shure MV88 vs Rode iXY.

On the other hand, Shure MV51 is quite significantly bigger and heavier. The width is about 3.4 inches whereas the length is a little above 5.0 inches. It has a weight of about 20.27 oz. While it is still easy to move around, it is definitely not as handy as the MV88. This microphone is more suitable for studio recording or indoor use.

Polar Pattern
The special feature of Shure MV88 is that it comes with four selectable polar patterns, which are stereo, mid-side, mono bidirectional, and mono cardioid. These polar patterns allow you to adapt the mic as needed to suit different uses and environments. The stereo polar pattern is very nice because you can adjust the width. Meanwhile, the mono bidirectional polar pattern is great for recording interviews.

On the other hand, Shure MV51 only has one polar pattern which is cardioid. It captures sound signals from the front, it does not capture from the sides and rear. This polar pattern is suitable when you want to focus capturing from a single direction. It is suitable for most music recordings.

Technical Specs

Shure MV88Shure MV51
- Transducer Type : Cardioid (1cm), Bidirectional Condenser Cartridge (1cm) - Transducer Type : Electret Condenser
- Polar Pattern : Adjustable Width Stereo / Mono Bidirectional / Mono Cardioid / Mid-Side- Polar Pattern : Cardioid
- Frequency Response : 20 Hz to 20,000 Hz- Frequency Response : 20 Hz to 20,000 Hz

Shure MV88 connects to an iOS device using the Lightning connector. It is very simple to use. It does not need any cable. According to Shure, you just need to plug the integrated connector to the port. The mic is designed to sit on the top of the device.

On the other hand, Shure MV51 supports USB and Lightning connections. It needs the suitable cable to connect to your device. One nice thing is that it is compatible with virtually any device – it can work with an iOS, Android, Mac, or PC.

In general, both mics have very good sound quality. They have relatively low noise, while being crisp and accurate. Each of them also comes with several built-in DSP presets that can enhance the sound character and overall quality.

Shure MV88 is very good for field recordings, interviews, and podcasts as the sound is crisp and detailed. However, note that the maximum SPL handling is only 120 dB. It won’t be able to handle loud voices or instruments.

On the other hand, Shure MV51 is excellent for musical recordings. It has a higher maximum SPL handling, up to 130 dB. So, it can handle loud vocals or instruments. The sound is also more full-bodied, more musical, and naturally warm.

Shure MV88 Vs MV51

- 5 DSP preset modes (Speech, Singing, Flat, Acoustic Instrument, Loud)
- Automatically adjusts EQ, compression and limiting for optimal results.Headphone output:Available through Apple device
- Matched cardioid and bi-directional 1 cm cartridges for best-in-class audio
- Mid-side architecture for a phase-perfect, clear stereo image
- 5 DSP Preset Modes (Speech, Singing, Flat, Acoustic Instrument, Loud)
- Automatically adjusts Gain, EQ, Compression and Limiting for optimal results
- Front panel touch controls for mode selection, headphone volume, microphone gain, and mute
- Built-in headphone output for real-time monitoring

For a versatile microphone, Shure MV88 is the way to go. It is more portable, and it comes with multiple polar patterns that allow you to adapt to different conditions. On the other hand, Shure MV51 is more specialized for musical recordings.

Shure MV5 Vs Blue Yeti Comparison

Shure MV5 and Blue Yeti are interesting options for a USB mic. Both of these microphones can be used with your computer via USB. However, they offer very different advantages. Shure MV5 is more portable, whereas Blue Yeti is adjustable for different desktop conditions. See the detailed comparisons of Shure MV5 vs Blue Yeti below!

By reading the following article, you will find out more about:
– The unique features available on Shure MV5 vs Blue Yeti,
– The supported connections and platforms of the two mics,
– The comparisons of their sound quality, and
– Which mic that is more recommended for the money.

Size and Weight
Perhaps the first thing that you need to consider when choosing between these two microphones is their dimensions. Do you need your mic to be highly portable? If so, Shure MV5 is more suitable for you. Unlike the competitor here, Shure MV5 is very compact and lightweight. The actual mic is shaped like a ball while featuring a grille that looks just like the famous Elvis mic. The mic comes with a stand that is also quite compact and lightweight.

The mic’s position on the stand is adjustable. Also, you can just remove the stand when it is not used. So, the whole thing is very practical and adaptable. The controls are near the bottom of the mic with the connection ports. See the complete review here: Shure MV5 Review.

On the other hand, Blue Yeti is more suitable for desktop usage. The mic’s stand, although adjustable, is not very portable. It is rather bulky and somewhat heavier. Still, the build quality is very good. The housing feels sturdy and durable. Blue Yeti also looks stylish. There are several color choices, such as black, silver, platinum, blue, teal, red, and slate.

Technical Specs

Shure MV5Blue Yeti
- Type : Condenser- Capsules : condenser, pressure gradient
- Polar Pattern : Cardioid- Polar Patterns : cardioid, bidirectional, omnidirectional, stereo
- Frequency Response : 20 Hz to 20,000 Hz- Frequency Response : 20Hz - 20kHz

If you work with Apple devices, Shure MV5 may be better due to the Lightning connector. This mic has both Lightning and USB connectors, so it is very versatile. According to Shure, this mic can work with PC, Mac, Android, and iOS. It also has the Apple MFi certification, ensuring full compatibility with any iOS device.

Shure MV5 has a cardioid polar pattern, which means that it captures sound signals from the front. There are three built-in DSP presets (vocal, instrument, flat) that are useful for enhancing the sound quality in different applications. There is a headphone output for direct monitoring, too.

Blue Yeti uses USB. It is compatible with Windows and Mac OS X platforms. Some users say that it also works on some Linux distros and Android (the Android platform needs to support USB OTG). However, it doesn’t work with iPad or iOS.

Blue Yeti comes with four selectable polar patterns, which include cardioid, stereo, omnidirectional, and bidirectional. These polar patterns allow you to adjust the mic to have the best pickup in different conditions. For example, cardioid is great when there is just one person talking, whereas bidirectional is useful for dialogues and interviews. There are headphone output, mute button, and gain control.

Sound Quality
In terms of sound quality, the two mics are really comparable to each other, so you are not going to miss an important advantage. In general, both mics sound clear and detailed. Shure MV5 may become more musical and more pleasant to hear if you use either the vocal or the instrument DSP preset. However, Blue Yeti does offer excellent accuracy and tonality, too.

Shure MV5 Vs Blue Yeti

- 3 DSP Preset Modes (Vocals, Flat, Instrument)
- Automatically applies gain, EQ, compression and limiting for optimal results
- Built-in headphone output for real-time monitoring
- Custom-tuned microphone capsule provides best-in-class audio
- Available in 2 colors gray with black foam and black with red foam
- Tri-capsule array - 3 condenser capsules can record almost any situation
- Multiple pattern selection - cardioid, bidirectional, omnidirectional & stereo
- Gain control, mute button, zero-latency headphone output. Dimensions (extended in stand) : 4.72 x 4.92 x 11.61 inches
- Perfect for vocals, musical instruments, podcasting, voiceovers, interviews, field recordings, conference calls
- Compatible with Windows 10, Windows 8 (including 8.1), Windows 7, Windows Vista, Windows XP

Choosing between Shure MV5 and Blue Yeti is indeed difficult, but in the end, Shure MV5 is the winner. It is slightly better in terms of value. It is more portable, and it has multiple connectivity options. It can work with a wide range of platforms, including mobile devices. The sound quality is good, too.

AKG D5 Vs SM58 Comparison

Shure SM58 has become the go-to choice of many people for live vocals. There are good reasons. The microphone is certainly a good-quality one. It is simple to use while offering good sound quality. However, people who have met AKG D5 say that this mic is even better. So, how do AKG D5 vs SM58 compare?

Continue reading below to find out more about:
– The designs and features of AKG D5 and Shure SM58,
– The comparisons of the sound quality of the two mics,
– The distinctive advantages of each mic, and
– Which mic that is more recommended for the money.

Design and Build Quality
AKG D5 is a stylish microphone. It does not look like a typical conventional microphone. It features a black grill and body along with a large AKG logo. The shape is quite elegant. Regarding the build quality, AKG D5 is also very good. The housing feels truly solid and rugged. This mic is certainly ready to be brought along in trips and travels. See also: Neumann TLM 102 vs AKG C414.

Shure SM58 is also a rugged and durable microphone, but the design is very conventional. It simply features a spherical metallic grille and a black body. Well, it just looks exactly like many other mics. The Shure brand is written near the base of the grille. Nevertheless, the look of the mic is indeed not the most important factor; as long as it works and is durable enough, it is great.

Technical Specs

- Polar Pattern : Supercardioid- Polar Pattern : Cardioid
- Audio frequency bandwidth : 70 - 20000 Hz- Frequency Response : 50 to 15,000 Hz
- Sensitivity : 2.6 mV/Pa- Sensitivity : (at 1,000 Hz Open Circuit Voltage) : -54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL

Polar Pattern
When choosing between AKG D5 vs SM58, note that they come with different polar patterns. AKG says that the D5 is a supercardioid mic. On the other hand, Shure SM58 is a cardioid mic. The different polar patterns may provide the most benefits for different cases.

As a supercardioid mic, AKG D5 has a considerably narrower pickup angle on the front. As the effect, it is much more resistant to environmental noise, especially against sound signals coming from the sides. This is a big advantage when there are other performers on the stage, such as the instruments. However, this polar pattern may capture some noise from the back, so make sure to give enough space between the singer and the audience to avoid picking such noise.

Shure SM58 is a cardioid mic. This polar pattern is perhaps the most familiar one to us. A cardioid mic primarily picks up sound signals from the front while rejecting the sides and rear. It has a wider pickup angle than supercardioid. So, it is relatively more prone to noise coming from the sides.

Sound Quality
Of course, both mics sound great. However, AKG D5 has slightly more high-end content, whereas Shure SM58’s high-end content tends to be somewhat rolled off. Furthermore, AKG D5 also has slightly lower bass. This is easily noticeable when the mic pops on a breath sound. Hence, it is a good choice for bass amps or bass vocals. Shure SM58 doesn’t reach as low. Both mics have decent clarity, as they are capable of delivering sharp, detailed sounds.

AKG D5 Vs SM58

- Rugged construction
- Handheld dynamic vocal microphone designed for lead and backing vocals
- Patented AKG laminated varimotion diaphragm
- Super-cardioid polar pattern for high gain before Feedback
- Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
- Effective built-in spherical wind and pop filter. Frequency response: 50 to 15,000 Hz
- Pneumatic shock-mount system cuts down handling noise.
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise

Between the two mics, we recommend you to choose AKG D5. This mic has a stylish design, and the supercardioid polar pattern is handy for reducing environmental noise from the sides. The sound has better high-end content and bass reach.

Shure MV5 Review: Affordable yet Very Versatile

Finding a decent portable mic may be quite a challenge. Such mics often have limited features and low quality. However, Shure MV5 is quite different from the others. At first, it may remind you of the legendary ‘Elvis microphone’, except that it is digital and smaller. Continue reading Shure MV5 review below to see the great things of this mic!

Below, you can find the information about:
– The special features of Shure MV5,
– The platforms supported by Shure MV5,
– The sound quality of Shure MV5, and
– The recommendation whether to buy or not to buy Shure MV5.

Shure MV5 is shaped like a ball with a diameter of about 2.6 inches and a weight of about 90 grams without the mounting stand. The pattern of the grille is similar to that of the legendary ‘Elvis microphone’. It does look nice and stylish. However, both the body and grille are made of plastic, so they aren’t very durable. For live applications, take a look at Sennheiser E945 vs Shure Beta 58A!

The mic comes with a mounting stand and everything you need to get started right away. The mounting stand is made of duralumin, and is capable of doing a good job in suspending the mic. You can adjust the mic’s position by adjusting the nut. You can easily carry the mic along with the accessories wherever you go.

One of the best things about Shure MV5 is that it is compatible with virtually any device. It features a micro USB output and comes with the suitable cables for connecting to a USB connector or a Lightning connector. In other words, Shure MV5 can work with Windows, Linux, and Mac. In addition, Shure says that it is compatible with Android and iOS devices. The versatile connectivity makes this mic suitable for people who often work with different platforms.

On the back, there is also a 3.5 mm headphone port for real-time monitoring. This is very handy for direct monitoring while you are recording. There is a control knob for adjusting the headphone volume.

However, it has no on-board control for adjusting the gain level – to adjust the gain level, you need to access the mic’s settings on your computer or on the mobile app. Fortunately, you don’t really need to tinker with the settings as Shure MV5 already sounds good right out of the box.

Sound Quality
Shure MV5 is surprisingly able to deliver decent sound quality. The dynamic range is good, and it can handle high SPL easily without clipping. It has low noise levels, ensuring good sound clarity. Well, the clarity is still not comparable to those high-end mics, but it is definitely good enough to be usable and useful. There is no hiss that is often associated with cheap mics.

Shure MV5 has a cardioid polar pattern. It does a good job in focusing on the source while attenuating environmental noise. The sound accuracy is good, thanks to the wide frequency response range. The built-in A/D converter also ensures good sound quality.

Shure MV5 comes with three built-in DSP presets. They are actually useful for their intended purposes. These presets allow lower compression levels and some EQ touches that enhance the brightness. If you prefer raw or unprocessed output, you can use the ‘flat’ preset and tweak the EQ later in the software.


- Apple MFi (Made for iPhone/iPod/iPad) Certified for direct connection to any iOS device without the need for any additional adapters or connection kits - 3 DSP Preset Modes (Vocals, Flat, Instrument) - Automatically applies gain, EQ, compression and limiting for optimal results - Built-in headphone output for real-time monitoring - Custom-tuned microphone capsule provides best-in-class audio - Available in 2 colors gray with black foam and black with red foam - Included anodized aluminum desktop stand and integrated thread mount compatible with any standard 1/4" camera tripod thread

If you are looking for an affordable yet versatile mic with good sound quality, Shure MV5 is a very good choice. It is quite portable, it is compatible with almost any platform, and it has decent sound quality.

Shure MV5: Specifications
Dimensions H×W×D (w/ Mounting Stand): 89 mm × 142 mm × 97 mm
Weight (w/ Mounting Stand): 160 grams / 5.6 oz
Housing: PC/ABS and Die-Cast Zinc Frame
DSP Presets: Voice/Instrument/Flat
MFi Certified: Yes
Type: Electret condenser (16 mm)
Frequency Response: 20 Hz – 20 kHz
Polar Pattern: Cardioid Unidirectional
A/D Converter: 24-bit/48 kHz
Maximum SPL: 130 dB SPL
Gain Range: Adjustable from 0 to +36 dB
Mute Button: Yes
Headphone Out: 3.5 mm (1/8″)
Power Requirements: Powered by USB or Lightning connector
• one Micro-B-to-USB cable
• one Micro-B-to-Lightning cable
• mounting stand
• stand adapter ¼”
• 20-thread (standard tripod mount)

Shure MV5 Review: Pros and Cons
• Low noise, good sound quality
• Compatible with virtually any device
• Useful DSP presets for different needs
• Has real-time monitoring
• Affordable price
• The plastic body isn’t very durable

Shure MV5: Price
Check the best price for Shure MV5 here!