HyperX QuadCast vs BLUE Yeti

Starting a podcast can be intimidating because not only for this is your first experience sharing information or even knowledge and personal opinion, it also require several gears to run which one of them is a microphone. Thankfully there are already lots of great options like HyperX QuadCast Vs BLUE Yeti to accompany your journey and they are equally working well to serve the function. For those who are also eyeing these microphones, see what they can offer below before deciding to shop.

In this article, we are going to give you information about:

  • Which Microphone to Purchase
  • What are HyperX QuadCast and BLUE Yeti
  • What HyperX QuadCast and BLUE Yeti Look Like
  • How are the Sound Quality of HyperX QuadCast and BLUE Yeti
  • What else HyperX QuadCast and BLUE Yeti can offer
  • HyperX QuadCast Vs BLUE Yeti

Microphone for Podcaster

In this always connected society, everything is more convenient and getting easier to access but also create lots of new content and method to send or deliver something to other people. We are not talking about the delivery service and ridesharing companies but about a method to deliver a message to a wider audience. In the past we have video commercial on TVs and audio commercial or similar campaign on radio. Content might be different now but they can take a new form through different platforms.

We are already familiar with video content streamed by content maker and it is widely spreading all over the internet through different platforms or site but in the last decade, another form of broadcasting is getting more popular and it is a podcast. The name itself is a portmanteau of iPod and broadcast but they are also available on different platforms; not limited to only iOS users. One of the greatest benefits of podcast is that it can reach people who don’t have time to watch videos or not fond of it.

For those who are preparing to be broadcasters, it is the time to start collecting the tools or equipment needed to record and stream your content. Most of us already have computers and audio software but what about the microphone. This tool is probably the first one we consider when starting as a broadcaster because the performance will decide your recorded audio and it is always necessary to get the best we can afford to achieve the maximum quality.

  1. XLR microphone, this is the type of mic used by lots of professional musicians all around the world because it will give you the best recording in terms of quality. Popular models like Heil PR40 Vs Shure SM7B often preferred by musician because they can do it all be it recording voice or instruments. The con is that they are not as convenient and will require you to get an audio interface before being connected to a computer or laptop.
  2. The next popular microphone type is USB microphone and as the name suggests, this microphone is the most convenient of various mic types we have today. What we need to do is only plugging the USB cable to the main device like computer, tablet, laptop or even phones and we are good to go. Most are also affordable, making them great for beginners but, when it comes to quality, they are not on par with XLR microphone yet.

About HyperX QuadCast and BLUE Yeti

Notice that we don’t include condenser and dynamic microphone as types because these two are built more for musicians and in professional setup which are not in the same category as broadcasting purpose especially podcasting because they are not as convenient as the two mentioned above. If you are trying to be a podcaster, we do think the USB type is the one to go since you can use them anywhere without much fuss to prepare as well as reliable enough for voice recording.

 HyperX QuadCastBLUE Yeti
Best Offerclick hereclick here
Product Dimensions5 x 4 x 9.8 inches
4.9 x 4.7 x 11.6 inches
Shipping Weight3.5 pounds3.8 pounds

As people are showing more enthusiasm towards the activity, this chance is not going to be passed by manufacturers to market their products as well and among those many companies offering USB microphones, HyperX and BLUE are two of the most recognized brands for their quality besides other giants like Shure. HyperX itself was starting their popularity a gaming peripheral especially headset but now they also carry standalone mic to let gamers gain a better experience while streaming compared to the mic we have on the headset itself.

The product loved so much by the market today from these companies are HyperX QuadCast and BLUE Yeti that we are sure has been included in various list of best microphone for podcasting are already familiar to you especially Yeti. QuadCast itself is fairly new because the mic was only introduced at CES 2019 and while in comparison to its seniors including BLUE the price is pretty much up there, it also seems to offer what the others not currently have.

As for BLUE Yeti, this is the go-to of so many people and have been long available in the market to have its own follower. It is a mid-tier model that will give you a very good performance but without the high cost especially after there are discount here and there. Not long ago, BLUE also launched the Yeti Pro microphone based on this popular model and it is offering a capability to also connect the mic through XLR, using audio interface, and of course recording at higher sample rate.

HyperX QuadCast and BLUE Yeti Design

Aesthetic wise, QuadCast is a very attractive microphone and this is not surprising coming from a company who made gaming peripherals because if you are not going to buy this mic for the quality then it must be for the appearance for who doesn’t attracted to this distinctive red and black fashion. It comes with a desktop stand and shock mount as well as has braided cable and an adapter to connect to the shock mount. In comparison to Yeti, this mic is longer as well but still shorter than Seiren.

Moving to BLUE Yeti, the latter is very well built and made entirely of metal so you don’t have to worry about its quality. The base it comes with is also made from the same metal as the mic and besides the knobs and the thumb screws, all of them are rigid. To prevent the mic from being knocked down easily, the heft is featured with rubber non-skid pads on the base. In addition, the base has USB port, headphone jack, and threaded base.

HyperX QuadCast and BLUE Yeti Performance

Now let’s see what HyperX QuadCast and BLUE Yeti can offer or their performance because no matter how good their built is, sound quality has to be number one and in this side, none of them are disappointing because they are on par in sound quality. They can record our voice the same as those professional streamers we see on YouTube and overall they give the same character as how we hear the voice directly while also being convenient in terms of features.

Performance wise, there is noise to consider and these two are also very well designed to produce very low noise yet, in comparison Yeti is easier in this part because while QuadCast is also producing very little noise, we have to do some adjustment or trial and error with the gain level and computer volume to reach the best sounding mic with no white noise but still produce audible sound.

HyperX QuadCast and BLUE Yeti Features

Both of them are coming with an adjustable pattern that you can select as needed despite most of us probably will just stay with cardioid. The knob state they can have a stereo that will accept audio from left and right, omnidirectional which record from all directions and is the most ideal for live events with group, bi-directional that open the front and rear for interviews and similar activities, then there is cardioid which only record from the front of the mic.

As it has been mentioned above, HyperX QuadCast and BLUE Yeti are featured with gain knob to adjust your input gain and they are useful to make sure you get enough sound without being gritty. Another favorite feature in these microphones is their headset jack and this is very useful when you need to monitor your voice as well for we never know how they will sound and having one is great to make sure you can always aware of issues like clipping or being inaudible.

In QuadCast, we have another interesting feature and it is instantly visible when you open the package because it is printed on top of the mic. Yes, this is a feature to deactivate this tool and it is simply by tapping this icon to turn the mic off including the illumination.

HyperX QuadCast vs BLUE Yeti

- Anti vibration shock mount
- Tap to mute sensor with LED indicator
- Four selectable polar patterns
- Mount adapter included
- Tri-capsule array - 3 condenser capsules can record almost any situation.
- Multiple pattern selection
- Gain control, mute button, zero-latency headphone output.
- Perfect for vocals, musical instruments, podcasting, voiceovers, interviews, field recordings, conference calls.Signal to Noise: 100dB

HyperX QuadCast and BLUE Yeti are an amazing microphones that will worth your attention while performance or sound quality wise they are on par with each other as well as have the same 16-bit depth and 48khz sampling rate. The white noise however, is going to need you adjust the gain knob and PC sound when using QuadCast, something that is not an issue in Yeti. Appearance wise we agree HyperX looks amazing and equally sturdy but also has interesting muting/deactivating function at your convenience. 

Conclusion 

Both of them are a nice microphone and there is no bad options between the two which is why we can go with just any model yet, if gaming is not your field and want to save some for another gear, we do recommend getting BLUE Yeti.

Leave a Comment

Your email address will not be published. Required fields are marked *