MXL 770 Vs Rode NT1A Comparison

Confused in choosing between MXL 770 vs Rode NT1A? Both of these two options are condenser mics that are quite popular on the market. These condenser mics are loved because of their natural sound and nice presence boost, both of which help to allow vocals to cut through the mix. So, which is the best condenser model that you better choose? Make sure that you read the comparisons below to make the right choice.

MXL 770 Vs Rode NT1A

MXL 770 may have a better edge in terms of design due to the classy, professional look. The black metal grille pairs nicely with the black housing, and the golden font and golden line that circle the housing add a nice elegant touch. This model is slightly shorter and thicker. It is also a little bit heavier. The bundle includes a shock mount which is quite useful for reducing mechanical vibrations.

On the other hand, Rode NT1A has this long, slender shape that is colored in a silver hue with a slight creamish tint – see our previous post about Audio Technica AT2035 vs Rode NT1A. Well, the metallic construction looks professional, but it doesn’t look as classy as MXL 770. Nevertheless, the bundle includes more accessories, such as the shock mount and the wind filter. These accessories are very usable.

Technical Specs

MXL 770Rode NT1A
- Polar Pattern: Cardioid- Polar Pattern : Cardioid
- Frequency Range: 30Hz-20kHz- Frequency Range : 20Hz - 20kHz
- Sensitivity: 15mV/Pa- Sensitivity : -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB
- Output Impedance: 150 ohms- Output Impedance : 100Ω

MXL 770 is equipped with a selectable -10dB pre-attenuation pad and an optional high pass filter at 150 Hz. The pre-attenuation pad is very handy. You can use this feature when recording a particularly loud singer. On the other hand, the high pass filter won’t be used as frequently because it tends to eliminate the natural low-end sound of the mic. This mic requires +48V phantom power.

Rode NT1A does not have any pre-attenuation pad or high pass filter, but the included shock mount and wind filter are good enough for reducing mechanical vibrations and low-frequency wind/breath noise. This mic is compatible with both +24V and +48V phantom power.

So, how do the performance qualities of MXL 770 vs Rode NT1A mics compare? In general, Rode NT1A is indeed better, even though MXL 770 is not bad either.

MXL 770 tends to be very raw-sounding. It captures the vocal nicely. It has good accuracy and natural low-end, so it is especially great for raps. However, it cannot be equalized very much.

On the other hand, Rode NT1A boasts an ultra-low noise level of only 5dBA. It also has a wider frequency response range, and the neutral response means that it doesn’t add much color to the recording. As a result, it can deliver more accurate sounds with impressive cleanliness and clarity. The output can be equalized more extensively. Although it may be too bright for extremely high-pitched and bassy singers, you can adjust the EQ to make it sound better.

MXL 770 Vs Rode NT1A

- Multipurpose small-diaphragm microphone
- Warm sound with extra clarity at the top end
- FET preamp with balanced, transformerless output
- Excellent for vocals, acoustic guitars, pianos, strings and voice-work
- Large 1 inch capsule with gold plated diaphragm
- Cardioid polar pattern
- Self Noise of only 5 dB (A)
- Ultra low noise, transformerless surface mount circuitry

Between these two models, Rode NT1A is the winner. It has better sound quality and versatility. It is more accurate and balanced. The ultra-low noise level is impressive. The neutral response allows you to adjust the EQ more freely.