Rode NT1A Vs AT2020 Comparison
Condenser microphone is a microphone which change the acoustically sound into a digital signal or media with electromagnetic diaphragm two iron plates as the recipient of the resulting vibrations from the sound input. This type of microphone is often used in music and recording studio in the world of youtube, usually the Youtuber games often use this type of mic. Someone who has had experience with this kind of mic will pick this mic is confused, therefore this article was created to help you. We recommend the Rode NT1A mic and AT2020 as perfect enough to accompany your recording activities.
You may read also Rode NT1A vs Blue Spark. Rode NT1A is condenser microphone, and it is such a kind of mic with an industry standard, ability of delivering the warmth, an extended dynamic range, clarity and high SPL, and capability as the other expensive microphones. NT1A is known as the Complete Vocal Recording Solution because, everything you need to get professional vocal recordings are available in NT1A’s hand. It also claims as the world’s quietest studio microphone by it features a self-noise level of only 5dBA, a studio grade pop shield and shock mount, a premium 20’ cable, dust cover, an instructional DVD with recording tips, and ten year warranty. This low noise is an ideal thing for vocal microphone as well as perfect for recording guitars and percussion that people will not just let it. One packaging is including Shockmount SM6, microphone cables, DVD instruction, and mic holster.
|Rode NT1A||Rode AT2020|
|- Polar Pattern : Cardioid||- Polar Pattern : Cardioid|
|- Frequency Range : 20Hz - 20kHz||- Frequency Range : 20Hz - 20kHz|
|- Output Impedance : 100Ω||- Output Impedance : 100Ω|
Audio Technica AT2020
AT2020 provide sound a great quality Audio-Technica classics. Capture the subtleties and nuances of vocals and acoustic guitar, then take a screaming guitar amplifier cabinets, all with one mic. This is the knife Switzerland Army condenser. You can put together your own stereo mic pairs. AT2020 is designed to comfortably in the mix and your budget at the same time. You need a mic that can deliver the goods sonically. To see what sets the AT2020 apart, take a close look at the back-electret capsule design is unusual. Like most AT2020 condenser microphone, which requires 48V phantom power. But while most condenser send this fee directly to the diaphragm element, Audio-Technica is not running the voltage to the back-plate of the condenser, so the diaphragm itself can be much thinner and more responsive-features often found on microphone measurement professionals. In addition, the diaphragm AT2020 is 16 mm, much smaller than the standard 1 inch diaphragm gives rapid transient response-it was good for the instrument, or mounted on an overhead drum. A soft 5-15 kHz impulse provides clean, fresh, airy top end, intrinsic and warmth of low-mid frequencies make it a favorite on male and female vocal. (See also :
Audio Technica AT2035 Vs AT2020 Comparison)
Rode NT1A Vs AT2020
AT2020 is having some good qualities, it did well with husky and deep male voices, it is also well built and durable, and comes with a nice carrying pouch giving it an added portability. The NT1A is done the same, but does more sensitive on its sound, neutral response, and boasts a flat. Both of these mics can record about anything with it, it is just according to you and your mind, which one is the best.