Rode NT1A Vs Studio Projects C1 Comparison

Condenser microphone is an electronic component that stores energy in the electrostatic field, this is also a type of microphone transducer using basic functioning capacitor change the acoustically energy into electrical energy. This type of microphone is widely used both for live or recording purposes. Need to know the market there are currently various types of condenser microphone, anyone? There Rode NT1A and Studio Projects C1. Here’s a little review and supported by a conclusion for you guys who are looking for the best microphone for you.

rode nt1a vs studio projects c1

Rode NT1A
This is the some times review about Rode NT1A before we currently did Rode NT1A vs Shure SM7B. Rode NT1-A Condenser Cardioid Microphone with 1 Inch of size is the condenser microphone for General instruments and recording vocals. This microphone has a 1 inch diaphragm with a gold-plated membrane, which provides a wide frequency response and the ratio of signal-to-noise. Polar pattern cardioid gives good off-axis rejection, minimizing the noise caused by the atmosphere of the room, instruments, monitors, headphones, reproduction of low signal-noise at high output levels. There is no doubt if Rode NT1-A successfully become an industry standard, it can deliver the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

Technical Specs

Rode NT1AShure SM7B
- Polar Pattern : Cardioid- Polar pattern : Cardioid
- Frequency Range : 20Hz - 20kHz- Frequency response : 20~20000Hz
- Sensitivity : -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB - Sensitivity : 14mV/Pa=-37dB(0dB=1V/Pa)
- Output Impedance : 100Ω- Output impedance : <200 Ohm

Studio Projects C1
Studio Projects C1 can perform and sound more like a microphone ten times its price. When you see the vocals, this large diaphragm cardioid microphone rivals some of the better known, more high-profile microphones out there. Some audio professionals call the C1 is one of the best vocal microphones in the world. But vocals are just the beginning of all. This flexible microphone is suitable for close mic’ing amplifiers, broadcast applications, and a wide variety of other recording tasks. The Studio Projects C1 is featured a pressure-gradient transducer employing high-quality transformerless design and extremely low noise. You can see the result of uncompromising dedication and advanced production capabilities, for example it has broken the barrier of quality vs. price for today’s professional or environmental studio recording projects. There is a web-spider shock, glass, and cases with the well-equipped C1 Hotel. Order today and experience true quality pros in large condensers, it is an unbelievably low prices.

Rode NT1A Vs Studio Projects C1

- Large 1 inch capsule with gold plated diaphragm
- Ultra low noise, transformerless surface mount circuitry
- Cardioid polar pattern, Wide dynamic range
- Pressure-Gradient Transducer: 1.06 Inch (27mm) 6 milimetres mylar diaphragm
- High Pass Filter, 6dB/octaveat 75Hz or 150Hz
- It comes with (-10db or -20dB Pad)

Both of these mics are good. However the previous statement is true enough. The Rode NT1-A will bring a lot of even more to the table. It will also give you more dynamic range, a better overall smoothness across the audio spectrum, couple of variable patterns and bass roll off to boot. Such a very sweet mic indeed.

Leave a Reply