Rode NTG 1 Vs NTG 3 Comparison

Are you wondering what the differences are between Rode NTG 1 and Rode NTG 3? Both products are shotgun condenser microphones, viable choices for capturing high-quality audio in a video recording. Even so, the fact that Rode NTG 3 is being priced considerably more expensively than Rode NTG 1 may make people wonder. Is Rode NTG 3 really better than Rode NTG 1? Is the price really worth it? In the following article, Rode NTG 1 and Rode NTG 3 will be put against each other so that you can see the differences and comparisons, to then determine which is the best for you.


As both are shotgun mics, you may not really expect much difference here; yet, there are several notable differences that you need to be aware of. Rode NTG 1 is slightly shorter and bulkier than Rode NTG 3. In addition, Rode NTG 1 is slightly lighter than Rode NTG 3. Both models feature rugged metal construction for maximum durability to face real-world usage. (Take a look : Rode NTG1 Vs NTG2 Comparison)

Technical Specs

Shure VP83Rode Videomic Pro
- Includes mic clip, wind shield and zip case - Acoustic Principle : Line Gradient
- Broadcast sound quality- Active Electronics : RF Bias
- Low noise circuitry- Frequency Range : 40Hz - 20kHz
- Super-cardioid polar pattern- Maximum SPL : 130dB SPL (@ 1kHz, 1% THD into 1KΩ load)
- Condenser transducer- Sensitivity : -30.0dB re 1 Volt/Pascal (31.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Rugged metal construction- Dimensions : 255.00mmH x 19.00mmW x 19.00mmD

Now going to the internal components, you need to know that Rode NTG 1 relies on a condenser transducer, hence the more affordable price. Rode NTG 1 utilizes a JFET impedance converter with bipolar output buffer. On the other hand, Rode NTG 3 boasts a true condenser design. Rode NTG 3 works with an external RF-biased condenser to deliver superior audio qualities.

Both models come with a supercardioid polar pattern. The supercardioid polar pattern has a very tight pick-up angle so that the mic will only capture sounds coming straight on the axis, while rejecting other sounds coming from the sides and rear. The design allows the mic to focus on capturing the sounds of the scene that you want, without getting disturbed by ambient noise.

Because of the different technologies that they use, Rode NTG 1 and Rode NTG 3 do have different performance qualities. Rode NTG 3 has an ultra-low self-noise level. With Rode NTG 3, you can effortlessly capture bright, crisp, and clear sounds. The 40 Hz – 20 kHz frequency response range promotes excellent vocal presence boost. Defined by the manufacturer for having a superior broadcast sound quality, Rode NTG 3 also possesses a high level of immunity against feedback and radio frequency interference, ensuring an uncompromised recording quality.

On the other hand, Rode NTG 1 has a slightly higher self-noise level. Rode NTG 1 comes with a frequency response range of 20 Hz – 20 kHz, which allows the mic to capture low-frequency sounds. However, to attenuate the low-frequency noise and focus on the mids and highs, Rode NTG 1 has been equipped with a high-pass filter.

Additionally, each of the two mics comes with a mic clip, a pop filter, and a padded zip pouch for storage and travel. However, Rode NTG 3’s bundle also includes an aluminum storage cylinder for total protection.

Rode NTG 1 Vs NTG 3

- Broadcast sound quality
- Low noise circuitry
- Condenser transducer
- Rugged metal construction
- Low handling noise
- Designed to withstand adverse environmental conditions
- 50% less self-noise than the majority of shotgun microphones
- True condenser (externally RF biased)
- Extremely low handling noise
- High level of immunity to radio frequency broadcast

Rode NTG 3 has been designed for demanding professional use, where high-resolution broadcast audio is needed. It is indeed a good investment for long-term usage in a professional field. On the other hand, Rode NTG 1 should be the choice only if you are limited in budget.

Leave a Reply