Rode NTG 2 Vs Sennheiser MKE 600

For video shooting, a lot of people tend to prefer to use a shotgun mic for capturing high-quality audio. This is because a shotgun mic has several unique characteristics and benefits. To begin with, it is able to capture clear and bright sounds even though it is placed not directly under the people’s chins. It can be hidden from the video’s field of view. It also captures some slight ambient noise to create a balanced, realistic audio recording. However, choosing the right shotgun mic can be tricky and confusing at times. Some shotgun mics that are popular choices on the market are Rode NTG 2 and Sennheiser MKE 600. Between the two, Sennheiser MKE 600 is more expensive while Rode NTG 2 is cheaper. Yet, both are often praised for their excellent levels of performance and quality. Which is the one that you should purchase?

Rode NTG 2 Vs Sennheiser MKE 600

Rode NTG 2
Rode NTG 2 is a shotgun mic that features a rugged metal construction for superior durability. It is quite solid and sturdy. It uses JFET impedance convertor with balanced transformer output, with a 0.50” capsule and a supercardioid polar pattern. It picks up sounds from the front and sides, and rejects sounds coming from 150-degree to the rear. With a frequency response range of 20 Hz – 20 kHz, Rode NTG 2 is actually able to deliver satisfying broadcast-quality sounds. The frequency response is accurate, with decent clarity and brightness. However, you will probably need a good preamp in your mixer, because the output level of Rode NTG 2 is very, very low. That is one weakness of the model.

Rode NTG 2 is also praised for its low equivalent noise level, which is barely 18 dB-A. It is also quite sensitive, allowing it to capture subtle sound details. It features a two-step high-pass filter, which can be set for flat or 80 Hz. This is a handy tool for attenuating low-frequency noise such as wind and breath sounds. Rode NTG 2 requires 48V phantom power, but it can also work with 1.5V AA batteries.

Technical Specs

Rode NTG 2Sennheiser MKE 600
- Frequency response: 20Hz - 20kHz- Frequency response: 40 - 20000 Hz
- Supercardioid- super cardioid
- 13.2 x 2 x 6 inches- 0.8 x 0.8 x 10.2 inches
- 48V phantom power or 1.5V AA battery- Microphone Power Source Voltage (DC) 1.5 V

Sennheiser MKE 600
Sennheiser MKE 600 is a little bit smaller, slimmer, and lighter than Rode NTG 2, so handling it can be quite easier. Even so, it offers a significantly higher output level, making it more reliable and convenient to use without demanding preamp requirements. It also features a lower equivalent noise level, so it is actually clearer compared to Rode NTG 2. It has a frequency response range of 40 Hz – 20 kHz, with a switchable low-cut filter for minimizing wind noise and breath sounds. Of course, like other shotgun mics, Sennheiser MKE 600 features a pronounced directivity with a supercardioid polar pattern for maximal rejection of side noise. It can work with 48V phantom power and 1.5V/1.2V AA batteries.

Rode NTG 2 Vs Sennheiser MKE 600

- Broadcast sound quality
- Low noise circuitry
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Pronounced directivity
- Maximal rejection of side noise
- Switchable "Low Cut" filter minimizes wind noise
- Supplied with foam windshield and shock mount

Conclusion
In general, Sennheiser MKE 600 makes the best choice here. Despite the apparently narrower frequency response range, it can actually deliver better audio reproduction with better clarity. The significantly higher output level is also very useful.

Leave a Reply