Rode NTG2 Vs VideoMic Pro Comparison

Looking for a microphone to be used as a professional audio recording my not an easy task. You can choose from so many different manufacturer in the market and in a wide range of price that also followed by their own quality. In today Rode NTG2 vs VideoMic Pro article, we are going to compare these two brothers to give you more information regarding what you can expect from them and how they are set apart from each other. If one/two of them took your interest, go check our article below.

In this article, we are going to give you information about:
– What are Rode NTG2 and VideoMic Pro
– What Rode NTG2 and VideoMic Pro can offer to you
– Rode NTG2 vs VideoMic Pro

About Rode NTG2
The Rode NTG2 is said to be one of the company’s entry-level 11” short range shotgun microphone that not only able to give you a clear accurate sound but also able to provide a good amount of rejection. As what you can expect from Rode, this microphone is built packed with quality and also one of the most popular model due to its remarkable performance as well as the wallet-friendly price. When it was first available, the mic can be considered as one that has the narrowest pickup pattern among other short shotgun.

Rode NTG2 Design
When talking about the built, Rode NTG2 is clearly built to be durable. It has a long 10-year warranty which is nice thing to have for an entry model. This one is a shotgun mic with a supercardioid polar pattern, which makes it a strongly directional in the front and has diminished responds to the sounds from the side and rear. It comes with lightweight metal housing that is ideal for camera mounting. However, there are some annoyance, such as the difficulty to access the roll of switch.

Rode NTG2 Abilities
Rode NTG2 comes with built-in low-cut/high pass filter that has a fixed cutoff frequency of 80Hz and is very useful to handle low frequency background rumble when you record in typical urban environment. This feature also let the shotgun to be mounted directly into something like HDSLR and operated with 2 AA batteries since not many out there have the same filtering.

As for the sound quality, Rode NTG2 has e very smooth and almost ideal frequency pattern for an entry-level mic, which means it able to represent the sound with accuracy and minimum coloration. The sound it able to reproduce is relatively rich and sensitive enough to capture the slightest detail in its range. If you are taking the price into consideration, the mic is more than enough for budget filming, but you will still need more tools and skills for certain situations.

The maximum SPL for this microphone is quite high, which makes it applicable for some very loud environments, such as those where you need to shout in order to be heardat 131 dB @ 1% THD. However, you may still need to add a bit gain to the recording because this mic is soft voices even though it has no impact on the quality. The noise figures are also average but it should be enough for low-entry level microphone and the sibilance is still kept to minimum. Read also: Sennheiser e935 Review here.

Technical Specs

Rode NTG2VideoMic Pro
-Power Req.: 48V Phantom Power or 1.5 AA battery- Rycote Lyre shock mounting onboard
-Equivalent Noise Level (A-weighted): 18dB-A- Ultra lightweight (85g/3oz)
- Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz- 9V battery powered - over 70 hours use (alkaline)
- Maximum Output Level: 6.9mV- Integrated shock mounting & foam windscreen
- Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)- 3.5mm stereo mini-jack output (dual mono)
- Output Impedance: 250Ω- Two step High Pass Filter (flat, 80Hz)
- Frequency Range: 20Hz - 20kHz- Three position level control (-10dB, 0, +20dB)
- Polar Pattern: Supercardioid- Camera shoe mount with 3/8” thread for easy boompole mounting

About VideoMic Pro
VideoMic Pro is also one of the most popular shotgun microphone from Rode. This unit is built to follow the predecessor that has been a long favorite of shooters who are seeking for an inexpensive and lightweight shotgun. Compared to the original model, the Pro is obviously smaller and has more accessible features. If you are in need of a microphone that can give a better quality audio record from your digital SLRs, you might want to take look at this one.

VideoMic Pro Design
As it has been mentioned earlier, VideoMic Pro is small and lightweight with just 15 cm long and 86 grams, so it won’t overwhelm even the smallest video-enabled SLRs. It is powered by a single 9-volt battery located just under the microphone itself and the company claims that this single battery will be able to give you enough juice for 70 hours of recording time. The connector is 3.5mm jack and you may get the free windshield which they called “Deadcat” when you redeem the extended warranty to give additional coverage against wind noise.

VideoMic Pro Abilities
VideoMic Pro is an active supercardioid condenser microphone that means the axis sound rejection is superb. Similar to the NTG2 model we have talked above, this one also has high pass filter that can be activated through a switch located at the back of the microphone to allow it internally filter out handling noise and low noise when taking video in crowded typical urban environments. The biggest improvement it has over the predecessor is the built in attenuation and boost functionality to operate under different kinds of situations as well as equipment.

VideoMic Pro 10 dB PAD and 0 dB settings will be great for loud sources or environments where the sound clarity is not an issue and even though it is similar to the older model that doesn’t contain any settings, the microphone will show its ability when the level is boosted +20 dB since it will give you a clear and clean boost for poor quality pre-amp inputs commonly found on Camcorders and DSLRs. This will allow you to get lower noise floor and cleaner audio signal.

Comparison
Now, let’s compare Rode NTG2 with VideoMic Pro. From weight, VideoMic Pro is slightly lighter compare to NTG2. From easy mounting, VMP is easier with the 3.5mm jack while NTG2 will need an XLR adapter for quick plugging. From the sound, NTG2 is better with its low noise circuitry to limits handling noise wonderfully as well as better sound fidelity and able to focus on subject more effectively with less overall hiss compared to VMP.

Rode NTG2 Vs VideoMic Pro

- Broadcast sound quality
- Low noise circuitry
- 48V phantom power or 1.5V AA battery
- Two step high-pass filter - flat or 80 Hz
- Rugged metal construction
- Rycote Lyre shock mounting onboard
- All new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6" length)
- Ultra lightweight (85g/3oz)

Conclusion
All in all, the decision is all yours to make. In our opinion, you can’t go wrong with any of these microphone. The NTG2 is clearly better than VideoMic Pro since it has better build and sound quality even though you will need to purchase some accessories later. The VideoMic Pro is of course more affordable, still able to performs great and meshes with DSLR so well, but taking all the plus side in the other, we will recommend you NTG2 over VMP.

Leave a Comment

Your email address will not be published. Required fields are marked *